Zentech DF2000 Guía para resolver problemas descargar pdf (Pagina 52)

the time of purchasing the converter box. For more information on the coupon program,

participating retailers, and eligible converter boxes, visit www.dtv2009.gov

, or call 1-888-388-

2009 (voice) or 1-877-530-2634 (TTY). Back to index

3. How do I install my digital-to-analog converter box?

You should refer to the manufacturer’s instructions in the manual and/or the “quick start guide”

provided with the converter box. If those are not available, you can use the instructions below

from the FCC’s basic guide to installing a digital-to-analog converter box.

To connect your digital-to-analog converter box to your analog TV you will need your analog

TV, the antenna that you have been using (indoor or outdoor), and the coaxial wire that currently

connects your antenna to your TV. It is important to know that you will still need to use an

antenna with your digital-to-analog converter box. Your new converter box comes with a

coaxial wire and a remote control. Make sure you unplug the power from your TV and, if you

are using an indoor amplified antenna, from your antenna before you begin installing the

converter box.

First unplug the existing coaxial antenna wire from your TV “Antenna In (RF)” port or socket.

(In most cases this socket is found in the back of your TV.)

Then plug the existing coaxial wire into the “Antenna In (RF)” port on your converter box.

Then, using the coaxial wire that came with your converter box, plug one end into the “Out to

TV (RF)” port on your converter box and the other end into the “Antenna In (RF)” port on your

TV.

Now plug the power cords on your converter box, TV, and if you are using an indoor ampligied

antenna, your antenna into a power outlet and turn onall three. Tune your TV to channel 3 or 4

using the instructions that came with your converter box. Once you’ve tuned your TV to one of

these channels, follow the on-screen set-up guide to scan for available DTV channels using the

remote control that came with your converter box.

If you have specific questions about your converter box, you can call the manufacturer’s

technical support hotline or ask your retailer. Back to index

4. I’ve tried to install my digital-to-analog converter box, but it’s not working. What

should I do?

Check to make sure you plugged the existing coaxial wire into the “Antenna In (RF) port on your

converter box.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 66 67

Sin comentarios

Zentech DF2000 Guía para resolver problemas Pagina 52