Zentech DF2000 Guía para resolver problemas descargar pdf (Pagina 65)

channel 3 or 4. Using the remote that comes with your Converter Box, follow the on-screen set-

up guide to scan for available DTV channels.

If your Converter Box includes an "analog pass-through" feature, this set up will also allow you

to receive any stations that still broadcast in analog in your area. Follow the instructions that

come with your Converter Box for how to tune analog channels.

Back to index

Setting Up Your Digital-to-Analog Converter (Basic with twin-lead antenna wire)

This describes installation of a digital-to-analog-converter box if your TV set has twin-lead

terminals for attaching the antenna, instead of a coaxial connector plug or port.

You will need your analog TV, the antenna you have been using (indoor or outdoor), the twin-

lead wire that currently connects your antenna to your TV, and two adaptors or "matching

transformers" as shown below. Before you begin the installation of the converter box, you should

unplug the power from your TV and from your antenna, if you are using an indoor, amplified

antenna..

Step 1 Unscrew the existing twin-lead antenna wire from your TV "Antenna In" twin-lead

terminals.

Step 2 Attach the existing twin-lead antenna wire to the twin-lead terminals on the twin-lead

adaptor. Then plug the adaptor's coaxial connector into the "Antenna In (RF)" port on the

Converter Box.

Step 3 Using coaxial wire, plug one end into the "Out To TV (RF)" port on the Converter Box.

Plug the other end into the coaxial port on the coaxial adaptor. Then attach the twin-lead output

of the coaxial adaptor to your TV "Antenna In" twin-lead terminals.

Step 4 Plug the power cords on your Converter Box and TV (and antenna, if you are using an

indoor, amplified antenna) into a power outlet, and turn on your TV and Converter Box. Use the

instructions that come with your Converter Box and tune your TV to channel 3 or 4. Then using

the remote that comes with your Converter Box, follow the on-screen set-up guide to scan for

available DTV channels.

If your Converter Box includes an "analog pass-through" feature, this set up will also allow you

to receive any stations that still broadcast in analog in your area. Follow the instructions that

come with your Converter Box for how to tune analog channels.

Back to index

Setting Up Your Digital-to-Analog Converter Box with a VCR

Analog TVs and VCRs can receive digital television (DTV) broadcast signals by using a

“Digital-to-Analog Converter Box” that can be purchased at retail stores. If you use a single

1 2 ... 60 61 62 63 64 65 66 67

Sin comentarios

Zentech DF2000 Guía para resolver problemas Pagina 65